3 Key Features of the Cordless Drill

  • Simon Archer
  • October 24, 2017
  • 0

As a homeowner, having a cordless drill in your collection of tools that you keep at home is essential. Whether you are hanging pictures, running cable, or assembling furniture, a cordless drill is a tool you will use repeatedly and it will save you tons of time.

If you are in the market for a cordless drill, there are many types of power tools available on the market. While many offer similar features, you still need to be mindful of a few things to ensure you get the one that best meets your needs. The following factors should be considered when purchasing a cordless drill and being mindful of them will help you in your search.

1. Purpose

When it comes to cordless drills, there are four types. A cordless screwdriver has the least amount of power but are lighter and more compact. A cordless driver, which is the most common, is appropriate for drilling through drywall, light wood, and metals with relative ease. Impact drivers look similar to a driver but it can accommodate more bits. The impact driver automatically senses resistance when you are drilling and can increase the torque to the level that you need.

While cordless drills are more suitable to drilling holes, an impact driver is effective in driving screws quickly. The hammer drill has the most power and is capable of drilling through harder surfaces such as concrete and brick. Before purchasing a cordless drill, you need to take into account the jobs you will be using it for.

2. Power

Getting started on a job and finding that you do not have a drill with the needed amount of power is extremely frustrating. The power of cordless drills are measured in volts. The drills with lower voltages are best suited to light-duty jobs such as hanging pictures and replacing screws whereas the ones with a higher amount are effective for jobs such as construction and renovations.

Cordless screwdrivers typically range from 2 to 11 volts, drivers have anywhere between 7 and 20 volts, impact drivers range from 14 to 20, and hammer drills can be purchased with power between 18 to 40 volts. Once again, it helps to be mindful of the typical jobs you will be doing.

An option with a higher voltage is just as bad as one with too low a voltage. If your jobs will range anywhere from drilling through drywall to brick, the cordless driver is the most popular option and can handle a large variety of tasks at 18 to 20 volts.

3. Weight

After a few hours of use, a cordless drill can get heavy, meaning you want to find one that will be comfortable for you. A higher voltage usually means a heavier drill so consider buying a drill that you will be able to complete a large majority of your jobs with.

A drill with anywhere between 14 and 20 volts is most popular and this will be lightweight enough for you to get the job done without it becoming too heavy but will still more than likely give you the power you need. Power drills come in three types that will allow you to distribute the weight in different ways so you can find one that you are most comfortable with. Pistol grip drills have a handle at the rear of the body and allow the user to drive a fastener straight on.

The T-handle grip is the most common and features a handle at the middle of the drill body, allowing for better weight distribution and less strain on the wrist. The right-angle drill has a chuck that points down allowing a user to complete jobs in tighter spaces and not have to strain or contort their hand to be able to fasten screws or bolts.

Previous «
Next »

Leave a Reply

Your email address will not be published. Required fields are marked *